Xi'an New Force Energy Engineering Co.,Ltd
Competitive Price Reliable Quality On Time Delivery Timely Service
Add to Cart
316L SS Coil Tubing is a low carbon austenitic stainless steel alloy coiled tubing. 316L is the most commonly used austenitic stainless steel in the chemical process industry. The addition of molybdenum increases general corrosion resistance, improves chloride pitting resistance and strengthens the alloy in high temperature service. Due to its excellent corrosion resistance and properties, 316L stainless steels have the ability to resist high temperature,low temperature as well as high pressure. They are cost effective and have been used in many areas.
The 316L Stainless Steel Coil tube is normally used to pass on gases and liquids for cooling, heating or other operations under corrosive conditions.
Specification:
Outer Diameter: 1/16” ~ 1”
Thickness: 0.01”~ 0.083”
Seanless tube specification: ASTM A269 and S213
Welded tube specification: ASTM A269 and A249
Seamless stainless steel coil tubing can reduce the cost of installation due to:
– Higher rate of materials utilization
– Fewer collections
– System integrity can be improved much.
– Improve the safety of the pipeline system.
Application:
Down hole tubes
Subsea umbilical’s
Process constructions
General control system
Steam supply lines
Gas transport lines
Instrumentation
Quality Control:
Hydrostatic test for each coil and conform to ASTM standards and requested specifications. The specification and length per coil can be customized according to customers’ requirements.
Chemical Composition:
| composition,% | |||||||||||
| Material | Standard | C | Mn | P | S | Si | Ni | Cr | Mo | N | Cu |
| 316 | S31600 | 0.080 | 2.00 | 0.045 | 0.030 | 1.00 | 10.0-14.0 | 16.0-18.0 | 2.00-3.00 | ... | ... |
| 316L | 0.035 | 2.00 | 0.045 | 0.030 | 1.00 | 10.0-15.0 | 16.0-18.0 | 2.00-3.00 | ... | ... | |
Size Chart:
| OD | Wall | Materials | Standard | Working Pressure | Length |
| 1/8" | 0.02,0.028,0.035 |
| ASTM-A 269 | 60-120 Mpa | Customized |
| 3/16" | 0.02,0.028,0.035,0.049 | ||||
| 1/4" | 0.02,0.028,0.035,0.049,0.065.0.083 | ||||
| 5/16" | |||||
| 3/8" | |||||
| 1/2" | |||||
| * OD: Up to 1 inch | |||||