Xi'an New Force Energy Engineering Co.,Ltd
Competitive Price Reliable Quality On Time Delivery Timely Service
Add to Cart
ASTM A106 Cold Rolled Seamless Tube Carbon Steel Material Anti Corresive
Cold drawn mill is used for producing small size pipe. There are several times of cold forming process, so yield strength and tensile strength values increase, while elongation and toughness values decrease. A heat treatment must to be applied for each cold forming operation.
Comparing hot rolled pipe, cold drawn pipe maintains precise dimension, smooth surface and shining appearance.
1. Standards
ASME SA106 —— American Boiler and Pressure Vessel norms
ASME SA333 —— American Boiler and Pressure Vessel norms
ASME SA335 —— American Boiler and Pressure Vessel norms
DIN17175 —— German industry standards
EN10216-2 —— European pressure piping standards
2. Application
For the low and medium pressure boiler and steam header pipes; for the high-pressure boiler and steam pipes, and the petrochemical industry pipes.
3. Steel pipes No. of main production:
SA106B, SA106C, SA333 I, SA333 VI, SA335 P5, SA335 P11, SA335 P12, SA335P22, SA335 P91, SA335 P92,
4. Size Available
3’’ ~ 6’’ (88.9mm~168.3mm)
5. Mechanical Properties
| Standards | Steel pipes No. | Tensile strength (Mpa) | Bend strength (Mpa) | Elongation (%) | Impact energy (J) | Hardness |
| ASME SA106 | SA106B | ≥415 | ≥240 | ≥22 | ≥35 | / |
| SA106C | ≥485 | ≥275 | ≥20 | ≥35 | / | |
| ASME SA333 | SA333 I | ≥380 | ≥205 | ≥28 | －45≥18 | / |
| SA335 P11 | ASME SA335 | ≥415 | ≥205 | ≥22 | ≥35 | ≤163HB |
| SA335 P12 | ≥415 | ≥220 | ≥22 | ≥35 | ≤163HB | |
| SA335 P22 | ≥415 | ≥205 | ≥22 | ≥35 | ≤163HB | |
| SA335 P5 | ≥415 | ≥205 | ≥22 | ≥35 | ≤187HB | |
| SA335 P91 | 585～760 | ≥415 | ≥20 | ≥35 | ≤250HB | |
| SA335 P92 | ≥620 | ≥440 | ≥20 | ≥35 | 250HB | |
| DIN17175 | ST45.8/III | 410～530 | ≥255 | ≥21 | ≥27(DVM) | / |
| 15Mo3 | 450～600 | ≥270 | ≥22 | ≥34(DVM) | / | |
| 13CrMo44 | 440～590 | ≥290 | ≥22 | ≥34(DVM) | / | |
| 10CrMo910 | 480～630 | ≥280 | ≥20 | ≥34(DVM) | / | |
| EN10216-2 | 15NiCuMoNb5-6-4 (WB36) | 610～780 | ≥440 | ≥19 | ≥40 | / |
6. Chemical Composition:
| Standards | Steel pipes No. | Chemical composition(%) | |||||||||||||
| C | Si | Mn | P | S | Cr | Mo | Cu | Ni | V | Al | W | Cb | N | ||
| ASME SA106 | SA106B | 0.17~ 0.25 | ≥ 0.1 | 0.70~ 1.00 | ≤0.030 | ≤0.030 | |||||||||
| SA106C | 0.23~ 0.27 | ≥ 0.1 | 0.70~ 1.00 | ≤0.030 | ≤0.030 | ||||||||||
| ASME SA333 | SA333 I | 0.09~ 0.12 | / | 0.7~ 1.00 | ≤0.020 | ≤0.010 | |||||||||
| SA333 VI | 0.09~ 0.12 | ≥ 0.1 | 0.9~ 1.10 | ≤0.020 | ≤0.010 | ||||||||||
| ASME SA335 | SA335 P11 | 0.05~ 0.15 | 0.50~ 1.0 | 0.30~ 0.60 | ≤0.030 | ≤0.030 | 1.00~ 1.50 | 0.50~ 1.00 | |||||||
| SA335 P12 | 0.05~ 0.15 | ≤0.50 | 0.30~ 0.61 | ≤0.030 | ≤0.030 | 0.80~ 1.25 | 0.44~ 0.65 | ||||||||
| SA335 P22 | 0.05~ 0.15 | ≤0.50 | 0.30~ 0.60 | ≤0.030 | ≤0.030 | 1.90~ 2.60 | 0.87~ 1.13 | ||||||||
| SA335 P5 | ≤0.15 | ≤0.50 | 0.30~ 0.60 | ≤0.025 | ≤0.025 | 4.00~ 6.00 | 0.45~ 0.65 | ||||||||
| SA335 P91 | 0.08~ 0.12 | 0.20~ 0.50 | 0.30~ 0.60 | ≤0.020 | ≤0.010 | 8.00~ 9.50 | 0.85~ 1.05 | ≤ 0.40 | 0.18 ~0.25 | ≤ 0.015 | 0.06~ 0.10 | 0.03~ 0.07 | |||
| SA335 P92 | 0.07~ 0.13 | ≤0.50 | 0.30~ 0.60 | ≤0.020 | ≤0.010 | 8.50~ 9.50 | 0.30~ 0.60 | ≤ 0.40 | 0.15~ 0.25 | ≤ 0.015 | 1.50~ 2.00 | 0.04~ 0.09 | 0.03~ 0.07 | ||
| DIN 17175 | ST45.8/III | ≤0.21 | 0.10~ 0.35 | 0.40~ 1.20 | ≤0.040 | ≤0.040 | ≤0.30 | ||||||||
| 15Mo3 | 0.12~ 0.20 | 0.10~ 0.35 | 0.40~ 0.80 | ≤0.035 | ≤0.035 | 0.25~ 0.35 | |||||||||
| 13CrMo44 | 0.10~ 0.18 | 0.10~ 0.35 | 0.40~ 0.70 | ≤0.035 | ≤0.035 | 0.70~ 1.10 | 0.45~ 0.65 | ||||||||
| 10CrMo910 | 0.08~ 0.15 | ≤0.50 | 0.30~ 0.70 | ≤0.025 | ≤0.020 | 2.00~ 2.50 | 0.90~ 1.10 | ≤0.30 | ≤ 0.30 | ≤ 0.015 | |||||
| EN1021 6-2 | 15NiCuMoNb5-6-4 (WB36) | ≤0.17 | 0.25~ 0.50 | 0.80~ 1.20 | ≤0.025 | ≤0.020 | ≤0.30 | 0.25~ 0.50 | 0.50~ 0.80 | 1.00~ 1.30 | ≤0.05 | 0.015~ 0.045 | |||
