Xi'an New Force Energy Engineering Co.,Ltd
Competitive Price Reliable Quality On Time Delivery Timely Service
Add to Cart
Heavy Wall Thickness Stainless Steel Round Pipe Hot Rolled 12'' XXS Size
TIPTOP supplies all types of boiler pipes, including seamless, heat-resistant steel pipes in accordance with DIN / EN and ASTM A / ASME SA.
1. Standards
ASTM A106 —— Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
ASTM A333 —— Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
ASTM A335 —— Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
DIN17175 —— German industry standards
EN10216-2 —— European pressure piping standards
2. Application
For the low and medium pressure boiler and steam header pipes; for the high-pressure boiler and steam pipes, and the petrochemical industry pipes.
3. Steel pipes No. of main production:
SA106B, SA106C, SA333 I, SA333 VI, SA335 P5, SA335 P11, SA335 P12, SA335P22, SA335 P91, SA335 P92,
ST45.8/III, 15Mo3, 13CrMo44, 10CrMo910, 15NiCuMoNb5-6-4
4. Dimensional Tolerance
| Pipe types | OD (mm) | Tolerance | WT (mm) | Tolerance |
| Hot- Rolled Seamless Steel Pipe | 219~457 | ±1.0％ | ≤20 | -10% ~ +12.5% |
| 20~40 | -10% +10% |
5. Available Size
| OD (mm/inch) | Wall thickness(SCH) | |||||||||||||||
| 10 | 20 | 30 | STD | 40 | 60 | XS | 80 | 100 | 120 | 140 | 160 | XXS | 100mm | 120mm | 140mm | |
| 323.8 (12'') | Δ | Δ | Δ | Δ | Δ | Δ | Δ | Δ | Δ | Δ | Δ | |||||
6. Mechanical Properties
| Standards | Steel pipes No. | Tensile strength (Mpa) | Bend strength (Mpa) | Elongation (%) | Impact energy (J) | Hardness |
| ASME SA106 | SA106B | ≥415 | ≥240 | ≥22 | ≥35 | / |
| SA106C | ≥485 | ≥275 | ≥20 | ≥35 | / | |
| ASME SA333 | SA333 I | ≥380 | ≥205 | ≥28 | －45≥18 | / |
| SA335 P11 | ASME SA335 | ≥415 | ≥205 | ≥22 | ≥35 | ≤163HB |
| SA335 P12 | ≥415 | ≥220 | ≥22 | ≥35 | ≤163HB | |
| SA335 P22 | ≥415 | ≥205 | ≥22 | ≥35 | ≤163HB | |
| SA335 P5 | ≥415 | ≥205 | ≥22 | ≥35 | ≤187HB | |
| SA335 P91 | 585～760 | ≥415 | ≥20 | ≥35 | ≤250HB | |
| SA335 P92 | ≥620 | ≥440 | ≥20 | ≥35 | 250HB | |
| DIN17175 | ST45.8/III | 410～530 | ≥255 | ≥21 | ≥27(DVM) | / |
| 15Mo3 | 450～600 | ≥270 | ≥22 | ≥34(DVM) | / | |
| 13CrMo44 | 440～590 | ≥290 | ≥22 | ≥34(DVM) | / | |
| 10CrMo910 | 480～630 | ≥280 | ≥20 | ≥34(DVM) | / | |
| EN10216-2 | 15NiCuMoNb5-6-4 (WB36) | 610～780 | ≥440 | ≥19 | ≥40 | / |
7. Chemical Composition:
| Standards | Steel pipes No. | Chemical composition(%) | |||||||||||||
| C | Si | Mn | P | S | Cr | Mo | Cu | Ni | V | Al | W | Cb | N | ||
| ASME SA106 | SA106B | 0.17~0.25 | ≥0.1 | 0.70~1.00 | ≤0.030 | ≤0.030 | |||||||||
| SA106C | 0.23~0.27 | ≥0.1 | 0.70~1.00 | ≤0.030 | ≤0.030 | ||||||||||
| ASME SA333 | SA333 I | 0.09~0.12 | / | 0.7~1.00 | ≤0.020 | ≤0.010 | |||||||||
| SA333 VI | 0.09~0.12 | ≥0.1 | 0.9~1.10 | ≤0.020 | ≤0.010 | ||||||||||
| ASME SA335 | SA335 P11 | 0.05~0.15 | 0.50~1.0 | 0.30~0.60 | ≤0.030 | ≤0.030 | 1.00~1.50 | 0.50~1.00 | |||||||
| SA335 P12 | 0.05~0.15 | ≤0.50 | 0.30~0.61 | ≤0.030 | ≤0.030 | 0.80~1.25 | 0.44~0.65 | ||||||||
| SA335 P22 | 0.05~0.15 | ≤0.50 | 0.30~0.60 | ≤0.030 | ≤0.030 | 1.90~2.60 | 0.87~1.13 | ||||||||
| SA335 P5 | ≤0.15 | ≤0.50 | 0.30~0.60 | ≤0.025 | ≤0.025 | 4.00~6.00 | 0.45~0.65 | ||||||||
| SA335 P91 | 0.08~0.12 | 0.20~0.50 | 0.30~0.60 | ≤0.020 | ≤0.010 | 8.00~9.50 | 0.85~1.05 | ≤0.40 | 0.18~0.25 | ≤0.015 | 0.06~0.10 | 0.03~0.07 | |||
| SA335 P92 | 0.07~0.13 | ≤0.50 | 0.30~0.60 | ≤0.020 | ≤0.010 | 8.50~9.50 | 0.30~0.60 | ≤0.40 | 0.15~0.25 | ≤0.015 | 1.50~2.00 | 0.04~0.09 | 0.03~0.07 | ||
| DIN 17175 | ST45.8/III | ≤0.21 | 0.10~0.35 | 0.40~1.20 | ≤0.040 | ≤0.040 | ≤0.30 | ||||||||
| 15Mo3 | 0.12~0.20 | 0.10~0.35 | 0.40~0.80 | ≤0.035 | ≤0.035 | 0.25~0.35 | |||||||||
| 13CrMo44 | 0.10~0.18 | 0.10~0.35 | 0.40~0.70 | ≤0.035 | ≤0.035 | 0.70~1.10 | 0.45~0.65 | ||||||||
| 10CrMo910 | 0.08~0.15 | ≤0.50 | 0.30~0.70 | ≤0.025 | ≤0.020 | 2.00~2.50 | 0.90~1.10 | ≤0.30 | ≤0.30 | ≤0.015 | |||||
| EN1021 6-2 | 15NiCuMoNb5-6-4 (WB36) | ≤0.17 | 0.25~0.50 | 0.80~1.20 | ≤0.025 | ≤0.020 | ≤0.30 | 0.25~0.50 | 0.50~0.80 | 1.00~1.30 | ≤0.05 | 0.015~0.045 | |||
